Spring Water Gallon Filling Machine Washer Filler Capper 3 In 1
Gallon filling machine description:
The production line is specially used for the production of 3-5
gallons of bottled drinking water. The bottle washer adopts
multi-channel washing liquid injection and disinfectant injection
to achieve the purpose of washing and disinfection. The sealing
machine can seal the bottle automatically, and the mouth of the
conveying bottle cap is equipped with a shower device to ensure the
sterile cleaning of the bottle cap. The series of production lines
can be automatic washing, disinfection, filling, pressing, counting
and output. With complete functions, novel design, high degree of
automation, is a collection of machine, electricity, gas in one of
the new drinking water barrel equipment.
Gallon water production steps:
Automatic lid extractor - automatic barrel outside brusher -
automatic barrel loader - barrel inside washing - filling -
automatic cap feeder - cap pressing - automatic conveyor belt
outgoing - lamp inspection - heat shrinkable - bagging - finished
1. Suitable bottle type: it is specially used for the production of
drinking water in 3-gallon and 5-gallon barrels.
2. Complete functions: the whole machine integrates the functions
of washing, filling and sealing.
3. Application: it is an ideal equipment for the production of
mineral water, distilled water and purified water
4. The machine adopts stainless steel, corrosion resistance and
Gallon filling machine parameters:
bottles per hour
|Barrel type||3 & 5 gallon barrel|
|Barrel dimension||φ270×490 (can be customiazed)|
|Material||High quality stainless steel|
|Compressed air pressure||0.4~0.6Mp|
Gallon filling machine details description:
Automatic bottle feeding system:
When the barrel is transported to the automatic bucket loading
device through the conveyor chain, the photoelectric sensor detects
that there are barrelsl on the chain, and then the cylinder on the
bottle rack will start, the barrel will be transferred to the
bucket plate on the top bucket rack, the electrical control will
start the cylinder on the bucket rack, the barrel will be sent to
the bucket washing machine on the conveyor chain. After strict
analysis and calculation of the mechanism, the barrel mouth after
automatic loading is aligned with the fixed cup of the barrel
The machine is divided into 12 rinses: two rinses are alkali
rinses, two rinses are disinfectant rinses, two rinses are reflux
rinses, two rinses are finished water rinses, and one drip-drying
station is set up after rinsing the detergent, disinfectant, reflux
water and finished water respectively, and the time is 20S.
It adopts grivity filling (filling valve type is optional accoridng
to customer barrel and requirements), it can finish hig speed
filling, and can control the backflow water well.
This machine adopts 1 pcs roller capping,automatic cap loading
susye, helps bottle get the cap automatically, then roller capping
system will help press the cap step by step during the bottle
moving, which can save production time. and whole capping part is
fully covered in the machine, so the process is very clean.
For more information please contact us!